Conductor
Digital Instructions
BUMC 1 Jonsson
Room Overview
The room contains a Bluetooth wall plate capable of connecting to a user’s phone or other Bluetooth-capable device. The audio will then be played back via overhead speakers.
NOTE: This audio is completely separate from the TV audio being played out of the pillow speaker.
PAIRING
- Press and hold the PAIR button until the blue LED on the RDL unit illuminates, then release.
Note: The blue LED flashes as long as the unit is available for pairing. If the blue LED stops flashing before the pairing process is completed, restart these steps. - While the blue LED is flashing, locate RDL_BT_FA on your device’s Bluetooth settings and click PAIR DEVICE, following screen prompts to complete the pairing process.
Note: The blue LED glows steady while the RDL unit is paired.
UN-PAIRING
The RDL unit will unpair automatically 30 seconds after the user device leaves the area.
The user device may also be manually disconnected by pressing and holding the PAIR button on the RDL unit.
RE-PAIRING
- Press and hold the PAIR button until the blue LED on the RDL unit illuminates, then release.
- While the blue LED is flashing, locate RDL_BT_FA under Previously Connected Devices in your device’s Bluetooth settings and click RDL_BT_FA, following screen prompts to complete the re-pairing process.
Note: If the re-pairing fails, click Forget Device on the user device and pair the RDL unit as a new device.
Upon successful pairing, the user device applications for audio playback through a Bluetooth interface may be used.
Volume Control
- Use your Bluetooth-connected device to control the general level of the audio coming out of the speakers.
- A master volume control knob is located on the wall if you are unable to reach the desired level.
