Independent Financial

Conference Room A-V

Cisco Webex Room Series Touch Controller Guide

Place Call From Contact List

1. Room is currently shut down. “Touch Screen to Begin”.

2. To search for someone in a specific list (Favorites, Directory or Recents), tap that list and then scroll down to locate the entry to be called.

3. Tap that entry to produce the green Call button. Then tap the green Call button, as shown.

4. The call will now be placed.
To end the call, tap the red End icon.

Place Call Using Name, Number or Address

1. Tap the green Call button 

2. Tap the Search or Dial field. This will invoke the keyboard.

3. Key in a name, number or address. Possible matches and/or suggestions will appear as you type. If the correct match appears in the list tap that match, otherwise keep typing.

4. When you have typed or located whom to call, tap the green Call button to place the call.

Initiate Video Conference

1. In a call tap Add.

2. Locate whom to call, in the usual way. 

3. Place the call, in the usual way. 

4. When This new call will now be added to the existing, creating a conference.
Repeat to add more people.

Do Not disturb

1. Tap the > icon in the upper left corner. 

2. Tap Do not Disturb, as indicated. To deactivate the feature, repeat the procedure. 

Share Content Outside Calls

Using Proximity to Share Content

On your PC set Proximity to On to share content wirelessly with others.

To share content outside calls, connect the source, make sure it is switched on and tap Share. You will then be offered to share content.

Share Content in a Call

1. Connect the source to the video system with a suitable cable, make sure it has been switched on and tap Share. 

2. Tap Local Preview to view the content without sharing it. Tap the X in the upper right corner to return to the previous display 

3. To discontinue the preview, tap Stop preview

To share content with the remote participants, tap Share in call

4. When To stop sharing content, tap Stop Sharing, as shown. 

Solstice - Wireless Content Sharing Guide

How to Connect

Open the Solstice App, find your room’s display, then click to connect.

If prompted, enter in the 4-digit screen key visible on the display

How to Share and Control Content

Share content to the display using the options on the Share panel.

Arrange and control shared content on the Layout panel.

Other Ways to Use the App

  • Drag and drop posts on or off the on-deck panel on the left side of the app.
  • Click and hold, or right-click a post to view options to make it full screen, create a stack, or delete it.
  • Pinch-to-zoom a post on touch-enabled devices.
  • On mobile devices, press and hold the red dot to temporarily markup the display.

USB passthrough mode

Using Room Kit Mini as a USB device simply plug the USB-C into your computer.

The device may be used as a USB microphone, speaker, and camera.

This mode makes use of:

  • The camera of the device
  • The microphones of the device
  • The loudspeakers of the device
  • If any, the screen that is connected to the device
  • A computer with a third-party client*

The unit will show up as a generic USB microphone, speaker, and camera. These devices can be used with any app on the computer.

Need Further Help?
Contact Us!